Nā kiko'ī
Ua hoʻopauʻo Jindie i nā'āpana maloʻo o Jindii Loaʻa iā lākou kahi kūlana maikaʻi, kiʻekiʻe e hoʻopaʻaʻia, Versiatility a me Flarish-Flash Down. Hoʻohanaʻia lākou i nā noi kālepa a me nā noiʻenehana maʻamau e like me nā kino o nā pahi kaua, e hoʻopili ana a me nā pale. Ua hālāwai ka hui i nā koi o kona mau mea ulu e ulu nui ana me nā mea hou e hoʻonui ai a me ka holomua.
Nā Kūlana maʻamau
| Nā 'Youlelo'Āina | |||
| Pākaukau | Nā haʻona | Kū-starder | TOLECE |
| Mānoanoa (mm) | 0.1 - 4.0 | - | No 0.16 i 0.29 +/01 |
| No 0.30 a 0.71 +/05 | |||
| no 0.72 a 140 +/. 0,08 | |||
| No 1.41 a 2.00 +/- 0.11 | |||
| No 2.01 a 4.00 +/- 0.12 | |||
| Laulā (mm) | 50 - 1620 | 914, 122, 1525 | Slit Coil: +2, -0 |
| Id (mm) | 508, 203 | - | - |
| Coil density (kg / mm) | 6 max | - | - |
| Loaʻa i nā'āpana i nā'āpana i loko o ka mānoanoa o ka mānoanoa o 0.30 - 1.10 mm. | |||
| Nā Pīkuhi Propertinies | |||||||
| ALLOY (AA) | Huhū | Uts (MPA) | % E (min) (50mm gauge lōʻihi) | ||||
| Min | Max | ||||||
| 0.50 - 0.80 mm | 0.80 - 1.30 mm | 1.30 - 2.6 0mm | 2.60 - 4.00 mm | ||||
| 1050 | O | 55 | 95 | 22 | 25 | 29 | 30 |
| 1050 | H14 | 95 | 125 | 4 | 5 | 6 | 6 |
| 1050 | H18 | 125 | - | 3 | 3 | 4 | 4 |
| 1070 | O | - | 95 | 27 | 27 | 29 | 34 |
| 1070 | H14 | 95 | 120 | 4 | 5 | 6 | 7 |
| 1070 | H18 | 120 | - | 3 | 3 | 4 | 4 |
| 1200, 1100 | O | 70 | 110 | 20 | 25 | 29 | 30 |
| 1200, 1100 | H14 | 105 | 140 | 3 | 4 | 5 | 5 |
| 1200, 1100 | H16 | 125 | 150 | 2 | 3 | 4 | 4 |
| 1200, 1100 | H18 | 140 | - | 2 | 2 | 3 | 3 |
| 3103, 3003 | O | 90 | 130 | 20 | 23 | 24 | 24 |
| 3103, 3003 | H14 | 130 | 180 | 3 | 4 | 5 | 5 |
| 3103, 3003 | H16 | 150 | 195 | 2 | 3 | 4 | 4 |
| 3103, 3003 | H18 | 170 | - | 2 | 2 | 3 | 3 |
| 3105 | O | 95 | 145 | 14 | 14 | 15 | 16 |
| 3105 | H14 | 150 | 200 | 4 | 4 | 5 | 5 |
| 3105 | H16 | 175 | 215 | 2 | 2 | 3 | 4 |
| 3105 | H18 | 195 | - | 1 | 1 | 1 | 2 |
| 8011 | O | 85 | 120 | 20 | 23 | 25 | 30 |
| 8011 | H14 | 125 | 160 | 3 | 4 | 5 | 5 |
| 8011 | H16 | 150 | 180 | 2 | 3 | 4 | 4 |
| 8011 | H18 | 175 | - | 2 | 2 | 3 | 3 |
| Kinohi | ||||||
| Alloy (%) | Aa 1050 | Aa 1200 | Aa 3003 | AA 3103 | Ahea 3105 | Aa 8011 |
| Fe | 0.40 | 1.00 | 0.70 | 0.70 | 0.70 | 0.60 - 1.00 |
| Si | 0.25 | (F + si) | 0.60 | 0.50 | 0.6 | 0.50 - 0.90 |
| Mg | - | - | - | 0.30 | 0.20 - 0.80 | Poloka uila- |
| Mn | Poloka uila- | Poloka uila- | 1.0 - 1.50 | 0.9 - 1.50 | 0.30 - 0.80 | 0.20 |
| Cu | Poloka uila- | Poloka uila- | 0,05 - 0.20 | 0.10 | 0.30 | 0.10 |
| Zn | Poloka uila- | 0.10 | 0.10 | 0.20 | 0.25 | 0.20 |
| Ti | 033 | Poloka uila- | 0.1 (ti + zr) | 0.1 (ti + zr) | 0.10 | 0,08 |
| Cr | - | - | - | 0.10 | 0.10 | Poloka uila- |
| Kēlā me kēia (kekahi) | 033 | Poloka uila- | Poloka uila- | Poloka uila- | Poloka uila- | Poloka uila- |
| Ka huina (a kekahi) | - | 0.125 | 0.15 | 0.15 | 0.15 | 0.15 |
| Al | 99.50 | 99 | Koe | Koe | Koe | Koe |
| Hoʻokahi helu helu e hōʻike ana i nāʻike kiʻekiʻe loa | ||||||
HELLO NUI
| Nā 'Youlelo'Āina | ||
| Pākaukau | Nā haʻona | TOLECE |
| Mānoanoa (mm) | 0.3 - 2.00 | No 0.30 a 0.71 +/05 |
| No 0.72 i 1.4 +/- 0,08 | ||
| No 1.41 a 2.00 +/- 0.11 | ||
| Laulā (mm) | 50 - 1250 | Slit Coil: +2, -0 |
| Id (mm) | 203, 305, 406 no ka huinankiko <0.71 | - |
| 406, 508 For Hailin> 0.71 | ||
| Tnsity (kg / mm) | 3.5 Max | - |
| Nā Pīkuhi Propertinies | ||||
| ALLOY (AA) | Huhū | Uts (MPA) | % E (min) (50mm gauge lōʻihi) | |
| Min | Max | |||
| 3004 | O | 150 | 200 | 10 |
| 3004 | H32 | 193 | 240 | 1 |
| 3004 | H34 | 220 | 260 | 1 |
| 3004 | H36 | 240 | 280 | 1 |
| 3004 | H38 | 260 | - | 1 |
| 5005 | O | 103 | 144 | 12 |
| 5005 | H32 | 117 | 158 | 3 |
| 5005 | H34 | 137 | 180 | 2 |
| 5005 | H36 | 158 | 200 | 1 |
| 5005 | H38 | 180 | - | 1 |
| 5052 | O | 170 | 210 | 14 |
| 5052 | H32 | 210 | 260 | 4 |
| 5052 | H34 | 230 | 280 | 3 |
| 5052 | H36 | 255 | 300 | 2 |
| 5052 | H38 | 268 | - | 2 |
| 5251 | O | 160 | 200 | 13 |
| 5251 | H32 | 190 | 230 | 3 |
| 5251 | H34 | 210 | 250 | 3 |
| 5251 | H36 | 230 | 270 | 3 |
| 5251 | H38 | 255 | - | 2 |
| Kinohi | ||||
| Alloy (%) | Aa 3004 | Aa 5005 | Aa 5052 | Aa 5251 |
| Fe | 0.70 | 0.70 | 0.40 | 0.50 |
| Si | 0.30 | 0.30 | 0.25 | 0.40 |
| Mg | 0.80 - 1.30 | 0.50 - 1.10 | 2.20 - 2.80 | 1.80 - 2.40 |
| Mn | 1.00 - 1.50 | 0.20 | 0.10 | 0.10 - 0.50 |
| Cu | 0.25 | 0.20 | 0.10 | 0.15 |
| Zn | 0.25 | 0.25 | 0.10 | 0.15 |
| Ti | - | - | - | 0.15 |
| Cr | - | 0.10 | 0.15 - 0.35 | 0.15 |
| Kēlā me kēia (kekahi) | Poloka uila- | Poloka uila- | Poloka uila- | Poloka uila- |
| Ka huina (a kekahi) | 0.15 | 0.15 | 0.15 | 0.15 |
| Al | Koe | Koe | Koe | Koe |
| Hoʻokahi helu helu e hōʻike ana i nāʻike kiʻekiʻe loa | ||||
Paliole
Hoʻopiliʻia nā kiʻi i ka maka-a-lani a iʻole ka maka-hele-i-pall i ka pā, kāʻeiʻia i ka hdpe a me ka hardboard. Hāʻawiʻia ka palekana o Mistouture e Silica Gel Pres.
Noi
● Nā kaʻa kaʻa kaʻa a me nā kino
● noina
● Ke kāleleʻana i nā hale, nā panel a Alminim e pili ana i nā panels
● Ke kaʻa uila uila uila, nā flexibles, nā consform consform, etc
Kiʻi kiʻi kiʻi
