Aluminum Disc Specifications
| Inoa Huahana | Alloy | Maemae | ʻoʻoleʻa | Hōʻike | |
| mānoanoa | Anawaena | ||||
| Aluminum Discs | 1050, 1060, 3003, 3105, 6061, 5754 etc. | 96.95-99.70% | O, H12, H14 | 0.5-4.5 | 90-1020 |
Ka Hoʻohui Kimia (%) no nā Disc Aluminum
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ca | V | Ti | 'ē aʻe | Min Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | - | 0.05 | - | 0.05 | 0.03 | 0.03 | 99.5 |
| 1070 | 0.25 | 0.25 | 0.04 | 0.03 | 0.03 | - | - | 0.04 | - | 0.05 | 0.03 | 0.03 | 99.7 |
| 3003 | 0.6 | 0.7 | 0.05-0.20 | 1.00-1.50 | 0.03 | - | - | 0.1 | - | - | - | 0.15 | 96.75 |
Nā Pono Mechanical no nā Disc Aluminum
| Ka huhū | Mānoanoa (mm) | Ikaika U'i | Elongation(%) | Kūlana |
| O | 0.4-6.0 | 60-100 | ≥ 20 | GB/T3190-1996 |
| H12 | 0.5-6.0 | 70-120 | ≥ 4 | |
| H14 | 0.5-6.0 | 85-120 | ≥ 2 |
Ka Hana Hana o Aluminum Circles
Aluminum Aluminum Ingot/Master Alloys — Melting Furnace — Holding Furnace — DC Caster — Slab — Hot Rolling Mill — Cold Rolling Mill — Blanking (kuʻi ʻana i ka pōʻai) — Annealing Furnace (unwinding) — Hope Inspection — Packing — Delivery
Nā noi o nā pōʻai alumini
● Keaka a me nā lako kukui ʻoihana
● Mea kuke ʻoihana
● ʻO ka ea uila
● rim huila
● Nā kaʻa ukana a me nā kaʻa kaʻa pahu
● Nā pahu wahie
● Nā moku kaomi
● Waʻa Pontoon
● Nā pahu cryogenic
● Aluminum Utensil Top
● Aluminum Tadka Pan
● Pahu ʻaina awakea
● Aluminum Casseroles
● Aluminum Fry Pan
Kiʻi kikoʻī
